Cisco 350-501 Free Sample Exam Questions 2026

Here you can get the actual Cisco 350-501 exam questions and answers in PDF for free and for all questions premium file. These best Implementing and Operating Cisco Service Provider Network Core Technologies 350-501 PDF questions are for every Cisco users. Real 350-501 exam dumps that will assist you to crack the %certification% certification exam in the PDF format. For Advance preparation premium PDF files available for perfect exam preparation on reilable price option.

UNLOCK FULL
350-501 Exam Features

In Just $35 You can Access

• All Official Question Types
• Interactive Web-Based Practice Test Software
• No Installation or 3rd Party Software Required
• Customize your practice sessions (Free Demo)
• 24/7 Customer Support

Get Full Access

Page: 1 / 91
Total Questions: 452

Questions & Answers PDF

• Question 1

  

  A network engineer is testing an automation platform that interacts with Cisco networking devices via NETCONF over SSH. In accordance with internal security requirements:NETCONF sessions are permitted only from trusted sources in the 172.16.20.0/24 subnet.CLI SSH access is permitted from any source.Which configuration must the engineer apply on R1?

  • configure terminal hostname R1 ip domain-name mydomain.com crypto key generate rsa ip ssh version 1 access-list 1 permit 172.16.20.0 0.0.0.255 netconf ssh acl 1 line vty 0 4 transport input ssh end
  • configure terminal hostname R1 ip domain-name mydomain.com crypto key generate rsa ip ssh version 2 access-list 1 permit 172.16.20.0 0.0.0.255 access-list 1 permit any netconf ssh line vty 0 4 access-class 1 in transport input ssh end
  • configure terminal hostname R1 ip domain-name mydomain.com crypto key generate rsa ip ssh version 1 access-list 1 permit 172.16.20.0 0.0.0.255 access-list 2 permit any netconf ssh line vty 0 4 access-class 2 in transport input ssh end
  • configure terminal hostname R1 ip domain-name mydomain.com crypto key generate rsa ip ssh version 2 access-list 1 permit 172.16.20.0 0.0.0.255 netconf ssh acl 1 line vty 0 4 transport input ssh end

  Reveal Answer Answer: D Next Question

• Question 2

  

  Which two features will be used when defining SR-TE explicit path hops if the devices are using IP unnumbered interfaces? (Choose two.)

  • router ID
  • labels
  • node address
  • next hop address
  • output interface

  Reveal Answer Answer: B, C Next Question

• Question 3

  

  What Is the primary role of Ansible In a network?

  • It is used as a debugging tool for connectivity issues between the DMZ and an enterprise intranet.
  • It Is used to diagnose Layer 11ssues In data centers that span more than one city block.
  • It is used to deploy IPv6 configuration is networks That are dual slack.
  • It is used as a network automation provisioning and configuration tool.

  Reveal Answer Answer: D Next Question

• Question 4

  

  Which condition must be met for TI-LFA to protect LDP traffic?

  • For single-segment protection, the PQ node must be LDP and SR-capable.
  • The protected destination must have an associated LDP label and prefix-SID.
  • The point of local repair must be LDP-capable.
  • For double-segment protection, the P and Q nodes must be SR-capable.

  Reveal Answer Answer: D Next Question

• Question 5

  

  An engineer must implement QoS to prioritize traffic that requires better service throughout the network. The engineer started by configuring a class map to identify the high-priority traffic. Which additional tasks must the engineer perform to implement the new QoS policy?

  • Attach the class map to a policy map that sets the minimum bandwidth allocated to the classified traffic and designates the action to be taken on the traffic.
  • Attach the class map to a policy map that designates the action to be taken on the classified traffic and then attach the policy map to an interface using a service policy.
  • Attach the class map to a policy map within a VRF to segregate the high-priority traffic and then attach the policy map to an interface in another VRF.
  • Create a route map to manipulate the routes that are entered into the routing table and then attach the route map to an interface using a service policy.

  Reveal Answer Answer: B Next Question

• Question 6

  

  An engineer implemented LDP protocol on the ISP network. The engineer must ensure that there are no packet loss issues when IGP and LDP protocols are not synchronized. Which configuring must the engineer implement so that the IGP routing protocol will wait until LDP convergence is completed?

  • Disable IP CEF routers running LDP and enable LDP protocol.
  • Configure MPLS LDP IGP synchronization on the network.
  • Configure LDP sessions protection on the network.
  • Disable MPLS LDP IGP synchronization on the network.

  Reveal Answer Answer: B Next Question

• Question 7

  

  You are testing the capabilities of MPLS OAM ping.Which statement is true?

  • MPLS OAM ping works solely with Cisco MPLS TE
  • MPLS OAM ping works solely with P2P LSPs
  • An LSP breakage results in the ingress MPLS router never receiving any reply
  • An LSP is not required for the reply to reach the ingress MPLS router

  Reveal Answer Answer: D Next Question

• Question 8

  

  A network engineer must configure a router for Flexible NetFlow IPFIX export. The IP address of the destination server is 172.17.12.1. The source address must be set to the Loopback0 IPv4 address and exported packets must be set to DSCP CS3. The TTL must be 64 and the transport protocol must be set to UDP with destination port 4739. Which configuration must the engineer apply to the router?

  • configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 3 ttl 64 export-protocol netflow-v9 transport udp 4739 end
  • configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 24 ttl 64 export-protocol ipfix end
  • configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 24 ttl 64 export-protocol netflow-v9 transport udp 4739 end
  • configure terminal flow exporter EXPORTER-1 destination 172.17.12.1 source Loopback0 dscp 3 ttl 64 export-protocol ipfix end

  Reveal Answer Answer: B Next Question

• Question 9

  

  Why is the keyword none needed when implementing management plane security using TACACS?

  • It aItovSWMB6ter to query a RADIUS server when the TACACS+ server is unreachable.
  • It allows the local database to authenticate when the TACACS^ server is unreachable.
  • It allows authentication to succeed when the TACACS+ server is unreachable.
  • It prevents all users from accessing router 1 unless the TACACS+ server is reachable,

  Reveal Answer Answer: C Next Question

• Question 10

  

  A network engineer is configuring RIP as the routing protocol between multiple PEs and CEs. The engineer must avoid advertising the same routes back to their sources. Which action should be performed on the routers to accomplish this task?

  • Configure a different route distinguisher for each prefix.
  • Define the site of origin on each interface.
  • Define VRFs on each device to separate the traffic.
  • Enable bidirectional forwarding detection on each device.

  Reveal Answer Answer: B Next Question

Page: 1 / 91
Total Questions: 452

Previous Page Next Page